It seems that there is some variation among unLaces, so here's my spin on how it flies. I don't have a big arm - my best drives on open fields for distance reach about 300, or a little more if I get everything just right. I have a 174 gm unLace in firm rubber. With an unLace, if I throw with a little hyzer, it flips up and flies pretty straight for about 250, then fades gently. But if I don't put enough hyzer on the release, it starts to turn, and never stops - while it might have a little fade at the end, it seems more like the turn is slowing down a bit. The line between these two throws is interesting, and sometimes difficult to manage. And finally, get a little air under it, and it will rise pretty high and fade out, perhaps not as quickly as a more overstable disc, but the pattern is the same. Played it a fair amount today on a very windy course. Some observations: On 8, I had a very interesting time with it. 8 is a 225 foot hole with a tight tunnel over a gulley (so rollers won't work there), with some open area around the hole and woods around the gulley. I usually go around the tunnel with a hyzer bomb, and in the wind I tried that with the unLace. (Yes, should have gone more overstable, I know). It started out okay, but then got caught up in the breeze, rose to perhaps a hundred feet, and then came bombing down on the close left side of the gully. Won't try that again. Second shot, I had trees everywhere, no good line at all, just a tiny hole in the canopy about 20' up at 11:00 (with 12:00 to the hole). So I tossed a hammer (overhand) with it, and watched it sail out the hole (yay!), and lost sight of it. After crossing the gulley, I saw the disc resting on the concrete pad under the hole. It spiraled and slid just like I hoped. Trivial 3, I just dropped the unLace in the basket (so I played it for all three shots on the hole). On 12, a 330 ft hole with a number of moderate height trees right in the line to the hole, I was planning on getting it up a bit to the left, and letting it turn back towards the middle of the fairway. But the wind was coming from the left. I got the drive I wanted, but the disc turned faster than I thought, cut through the line of trees at about 150' to the right side, went down nicely on edge, and rolled out to about 320', 45' downwind of the hole. It stopped because it ran into the soft mulch at the base of another tree - I suspect (hope) that it would have kept going, turned a bit more left, and would have done a little victory lap around the hole. Wind got me on the long putt, but knocked down an easy 3. Wasn't planning a roller, but hey, I'll take it with 25-35 mph winds. Finally, 17 is a long 601 ft, but the wind was at my back. So I thought best to go under stable. Tried to huck the unLace as hard as I could with hyzer, it flew straight for a while, then faded out at about 240 ft. No idea what happened, except possibly my arm was tired after practicing drives for 45 minutes and then playing 16 holes in those winds. Expected more after fighting wind for 16 holes and finally having it blowing towards the hole. Perhaps I should have gotten it up a little higher, to catch the breeze. The hard plastic (rubber) is very durable, and even after the abuse I've heaped on it, the molding seams are still present (and very small). Perhaps I should rub them off and see if it changes the flight. The disc also gets a "too slick" feel when it gets dust on it, and it gathers dust more than most other discs, possibly due to static electricity effects. Otherwise very nice material. My particular hard unLace is a quirky and unique disc - I feel that once I really master it I'll be able to do some things well that I couldn't really do at all before I had it. However, I couldn't see using it in a limited disc match - it's a complimentary disc that does a few unusual things well, but isn't suitable to be a main driver.